An Elastomeric Waterproofing and concrete protection system
Life Expectancy in excess of 20 years and is CE class 2 certified.
No abrasive blast cleaning required, prepare the surface using high pressure water jetting.
Extremely high elasticity greater than 600% over a broad temperature range (-30c to 80c)
Recommended for brickwork and as an anticarbonation coating on concrete.
Ideal for walls and facades allowing the surface to breathe whilst preventing penetration by moisture and carbon dioxide.
Advanced environmentally compliant waterbased technology with zero emissions
Elastoflex is available in an extensive range of RAL Classic colours in a satin finish.
RD Coatings Elastoflex is for Walls and Facades based on pure acrylic resin. Elastoflex has superb elasticity and waterproofing properties, it is easy to apply without the need for abrasive blast cleaning. Elastoflex is a Fast Drying water based elastomeric coating which allows the substrate to breathe and has CE class 2 certification. It is recommended as a waterproof coating for concrete and brick to prevent the penetration of moisture and carbon dioxide, blocking the acceleration of corrosion of steel reinforcement inside the concrete. Available in an extensive range of RAL & NCS colours in a satin finish.
RD Coatings Elastoflex is a fast drying single pack waterbased pure acrylic waterproofing primer finish for walls and concrete facades. For sale to Professional contractors only. It has extremely high elasticity >600% over a broad temperature range (-30c to 80c) and has very good water vapour permeability to allow the surface to breathe. It is exterior durable without the need for abrasive blast cleaning on new and old masonry, with excellent resistance to dirt pick up. It can be applied by Airless spray, brush or roller on masonry,concrete and brick. Two coats are recommended on walls in aggressive environments. It has CE class 2 certification and has a life expectancy in excess of 20 years.
RD Coatings Elastoflex is a single pack primer finish a cost effective solution for the renovation of walls and concrete facades, protecting against the ingress of chlorides, carbonation and rusting of steel reinforcement It can be applied up to 350 microns in a single coat by airless spray, two coats may be required to achieve the recommended DFT by brush or roller.
Concrete and Brick: Surface to be clean, dry and undamaged compatible coating, free from oil grease and other contaminants.
Exposed masonry: Cracks to be filled with cement filler and prime with Unifix impregnation primer.
Painted surfaces: Surface to be clean, dry and undamaged compatible coating, free from oil grease and other contaminants.
Volume Solids (ISO 3223): 51%
VOC Content: 30 g/lt
Flash point (ISO 3679): Non Flammable
Dry Film thickness: 350 microns
Wet Film thickness: 685 microns
Theoretical coverage: 400g/sq m per 350 micron coat
Touch Dry 23c: 2 hrs
Overcoat 23c: 24 hrs
Nozzle tip: 15-23 thou
Pressure at nozzle: 2100psi,
Thinner: Water for airless spray only (3%)
H&S: Observe the precautionary information on the container. Refer to MSDS for full details on health and safety and storage regulations.
Only logged in customers who have purchased this product may leave a review.