A High Performance Low Odour two pack Polyurethane Antigraffitti Paint. Easy clean properties. Recommended for Public Buildings, Schools and Hospitals.
Hydrograff HP has excellent chemical, mechanical and abrasion resistance. It is recommended for use as an antigraffiti coating on concrete walls, brick and steel structures. It can be used as a floor coating in bars, restaurants and theatres.
It can be applied as a topcoat over Monoguard in a high performance exterior durable system for C5-M Coastal environments on steel fabrications.
Hydrograff HP is an easy to clean low odour coating which is approved for use in food and beverage production facilities, ideal for hygiene sensitive areas, hospitals , schools and public buildings drying to produce a hard easy clean surface.
Hydrograff HP can be applied to wooden and concrete floors subject to heavy wear and chemical spillage. It is available in Gloss (80%) and Satin (35%).
The dead matt finish has a unique application as a black out coating on stages and ceilings in theatres, concert halls and music venues. It has low odour so can be applied while buildings are occupied with the minimum disruption.
Hydrograff HP is available as a clearcoat in a gloss and matt finish. The gloss version has excellent Antigraffitti properties and may be applied over existing coatings for protection. The clearcoats are often specified by architects for steel, wood and concrete to capture the urban appeal in converted warehouses, barns and mills.
Hydrograff HP is available for free next day delivery in a wide range of RAL and NCS colours in gloss (80%) and satin (35%) finishes in 5lt packs.
The colours depicted on the site are for guidance only. The displayed colour will depend on your monitor and browser.
Hydrograff HP is a High Performance waterbased two pack aliphatic polyurethane hard coating with excellent abrasion and chemical resistance. It can be applied by Airless spray, brush or roller on steel, concrete, wood and plastics. It is an Antigraffiti coating available in high gloss and matt suitable for concrete or steel structures.
Hydrograff HP is a unique two pack topcoat recommended for use in C5-M aggressive marine and heavy industrial environments when applied over Monoguard. It is recommended for offshore environments, structural steel, building products, construction and agricultural equipment.
Hydrograff HP is available as a clearcoat and is specified by leading architects on exposed steelwork, concrete and wooden floors in building restorations to capture the urban appeal.
Hydrograff HP may be used as a floor coating and is approved for use in the food and beverage industry. With a unique 35% satin finish it is used as a black out coating in bars, restaurants and theatres. It can be applied up to 100 microns in a single coat by airless spray, two coats may be required to achieve the recommended DFT by brush or roller.
Hydrograff HP is available in 5lt packs across an extensive range of NCS and RAL colours for free next day delivery throughout the UK. Select your colours from the user friendly online colour palettes. It is available in Gloss (80%) and Satin (35%).
Hydrograff is resistant to most chemicals and has an easy clean surface. It is ideal for use as a floor and wall coating in sterile environments, clean rooms, schools and hospitals. The matt version is used as a black out coating for stages and ceilings in bustling theatres, music halls and concert venues.
AVACE are specialists in the field of protecting residential and commercial properties with environmentally compliant coatings. Water based Intumescent Steelmaster paints to protect structural steel from fire and corrosion. Low odour Bradite water based paints for concrete flooring. High performance exterior durable water based paints for UPVC windows & doors metal cladding and walls. Elastometal waterproofing paints for metal roofs. Elastoflex anticarbonation coatings for concrete structures. Demidekk Ultimate for long term protection of wood buildings.
Carbon Steel: Minimum St2 (ISO 8501-1), no abrasive blast cleaning required.
Galvanised steel: Surface to be clean and dry with a rough dull surface
Aluminium: Surface to be clean and dry, abrade with non metallic abrasives or pads
Painted surfaces: Surface to be clean, dry and undamaged compatible coating, free from oil grease and other contaminants.
Volume Solids (ISO 3223): Clear 40%, Tinted 50%
VOC Content: 20 g/lt
Flash point (ISO 3679): Non Flammable
Dry Film thickness: 50 microns
Wet Film thickness: 128 microns
Theoretical coverage: 7.80 sq m/lt
Mix Ratio: 4:1
Pot Life 23c: 2 hrs
Touch Dry 23c: 3 hrs
Overcoat 23c: 8 hrs
Nozzle tip: 7-9 thou
Pressure at nozzle: 2100psi, 34psi (HVLP or Pressure pot)
H&S: Observe the precautionary information on the container. Refer to MSDS for full health and safety information and storage regulations.
Only logged in customers who have purchased this product may leave a review.