Jotun Pilot ACR a single pack fast air drying acrylic direct to metal primer finish
It is suitable as a topcoat in atmospheric environments and can be applied at sub zero surface temperatures. It is certified not to spread surface flames and is available as a semigloss finish in a wide range of RAL and British standard colours.
Pilot ACR is a single pack, high build, fast air drying acrylic primer finish with a semigloss finish. It can be applied direct to metal or as a topcoat over existing painted surfaces. Suitable for application at sub zero surface temperatures by Airless spray, Conventional spray, brush or roller.
Pilot ACR is a topcoat over suitably primed substrates for steel structures and containers, modular buildings, construction equipment and building products. It provides excellent adhesion to steel, plastic and wood. Pilot ACR Paint may be used on steel when abrasive blast cleaning is not possible. Pilot ACR Paint may also be applied over zinc phosphate primers (Pilot QD) and most aged coatings. It can be applied up to 120 microns in a single coat by airless spray, two coats may be required to achieve the recommended DFT by brush or roller. It is resistant to continuous temperatures of up to 60°C
Carbon steel: Min St2 (ISO 8501-1).
Painted surfaces: Surface to be clean, dry and undamaged compatible coating, free from oil grease and other contaminants.
Volume Solids (ISO 3223): 55%
VOC Content: 266 g/lt
Flash point (ISO 3679): 25c
Dry Film thickness: 60-120 microns
Wet Film thickness: 110-220 microns
Theoretical coverage: 9.2-4.6 sq m/lt
Touch Dry 23c: 15 mins
Overcoat 23c: 1 hrs
Nozzle tip: 15-21 thou
Pressure at nozzle: 2100psi
Thinner: No. 7
H&S: Observe the precautionary information on the container. Refer to MSDS for full information on health and safety and storage regulations.
Only logged in customers who have purchased this product may leave a review.