One Coat Exterior Durable Matt Paint.

Touch Dry in 20 mins. Good colour and gloss retention. Air Drying. Acrylic High Build Primer Finish. No Primer required. Adheres direct to metals, concrete and wood.

Ideal for Containers, Fabrications and Home Improvements. Free Next Day Delivery on all RAL and British Std colours.

Jotun Conseal Tu Thumb1
Jotun Conseal Tu Thumb2
Jotun Conseal Tu Thumb3
Jotun Single Can Transparent

Jotun Conseal TU a fast air drying high build acrylic primer finish for Steel, Concrete and Wood.

Next Day Home Delivery Service.

Conseal TU is a multipurpose high build primer finish with very good colour retention and corrosion resistance.

Conseal TU is ideal as a one coat matt primer finish on large steel surfaces, sidings, garage doors, modular buildings, silos and large industrial equipment.

Conseal TU can be applied by brush , roller or spray on metals, building plastics, concrete, galvanised steel and wood.

Conseal TU is available in a wide range of RAL and British standard colours in a matt finish.

All RAL & British Standard colours are available in a matt finish. Follow the link to RAL and BS for the full colour range.


Conseal TU has very good colour retention and corrosion resistance for metals, equipment, cladding, plastics, concrete and wood.

Conseal TU  is ideal as a one coat matt primer finish on large metal surfaces, garage doors, containers, modular buildings, silos, skips and large industrial equipment.

Conseal TU is available in a wide range of RAL and British standard colours in a matt finish.

Conseal TU is a single pack, high build, fast air drying acrylic primer finish with a matt finish. It can be applied on multisurfaces direct to metal, galvanised steel, aluminium, other non metallic substrates as a one coat primer finish.

Conseal TU Primer Finish is suitable for application at sub zero surface temperatures by Airless spray, Conventional spray, brush or roller.

Conseal TU Primer Finish  is a single product solution for steel containers, modular buildings, construction equipment, cladding and building products. It provides excellent adhesion to multisurfaces including ferrous and non ferrous metals, plastic, concrete and wood.

Conseal TU Primer Finish may be used on steel  when abrasive blast cleaning is not possible. It may also be applied over zinc phosphate primers (Pilot QD) and most aged coatings.

Conseal TU can be applied up to 120 microns in a single coat by airless spray, two coats may be required to achieve the recommended DFT by brush or roller. It is resistant to continuous temperatures of up to 60°C

Surface Preparation

Carbon steel:  Min St2 (ISO 8501-1).
Galvanised steel:  Surface to be clean and dry with a rough dull surface
Aluminium:  Surface to be clean and dry, abrade with non metallic abrasives or pads
Concrete:  Thin up to 10% with No.7 thinner, apply a sealer coat prior to one full coat.
Wood, Painted surfaces: Surface to be sanded, free from oil grease and other contaminants.

Technical Data

Download Datasheet Download Datasheet

Volume Solids (ISO 3223):  49%
VOC Content:  470 g/lt
Flash point (ISO 3679):  25c
Dry Film thickness:  75-120 microns
Wet Film thickness:  150-245 microns
Theoretical coverage:  6.5-4.1 sq m/lt
Touch Dry 23c:  20 mins
Overcoat 23c:  2 hrs
Nozzle tip:  17-23 thou
Pressure at nozzle:  2100psi
Thinner:  No. 7
H&S:  Observe the precautionary information on the container. Refer to MSDS for full details on health and safety and storage regulations.


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.


RAL Classic 1000
RAL Classic 2000
RAL Classic 3000
RAL Classic 4000
RAL Classic 5000
RAL Classic 6000
RAL Classic 7000
RAL Classic 8000
RAL Classic 9000

Paint Can

Jotun Conseal TU Best Seller

View Product


Free Delivery