Jotun Penguard Clear Epoxy Floor Sealer for Concrete
Two pack Epoxy Clear Primer Sealer for Concrete Floors. Excellent Penetrating properties to improve Adhesion of Epoxy Floor Coating Systems.
Jotun Penguard Clear Epoxy Floor Sealer for Concrete
Penguard Clear Sealer is a fast drying two pack epoxy concrete sealer coating used for priming porous concrete surfaces prior to applying two pack epoxy floor coatings. It may also be used to seal in concrete dust in garages and workshops creating a very durable surface finish. It can be applied by spray but it is recommended that you use either a brush or a roller for increased penetration. It can be applied up to 50 microns in a single coat by airless spray, two coats may be required to achieve the recommended DFT by brush or roller. On porous concrete a thinned (up to 15% by volume) first coat maybe required prior to application of the epoxy finish coats.Recommended for factory concrete floors where resistance to heavy forklift traffic and chemical spillage is required. It is resistant to continuous heat of 120°C and a peak temperature of 140c in dry, atmospheric environments. Available in 5lt and 20lt packs for free delivery throughout the UK.
Tecnical Credentials.
Two pack high molecular weight Epoxy Polyamide sealer primer.
High Volume Solids 44%.
Clear Gloss Finish.
Dry Film Thickness 40 microns.
Theoretical Coverage 11.8 m2/lt (40 mics.)
Surface Dry 1 hr @ 23c.
Overcoat 4hrs @ 23c.
Pot Life 8 hrs @ 23c.
Apply by Airless Spray, Roller or Brush.
Thinner No. 17.
VOCs 496 g/lt.
Surface Preparation.
Coated Surfaces: Ensure the existing coat is intact, compatible, dry and free from oil grease and other contaminants.
Concrete: Mechanically abrade to remove loosely adhering material and laitance. Alternatively low pressure water washing to a rough , clean and laitance free surface. Moisture content at painting max 5%.
Download the technical data sheet for more information.
Jotun Penguard Clear Sealer is a fast drying two pack, epoxy sealer with excellent penetrating properties.
Jotun Penguard Clear Sealer is suitable for concrete and other masonry surfaces as part of a complete epoxy floor coating system or maybe used as a transparent coating over abrasive blast cleaned concrete.
This product can be applied by Airless spray, Conventional spray, brush or roller. It is resistant to continuous temperatures of up to 120°C and a peak temperature of 140°C for a maximum of 1 hour in dry and atmospheric environments. The temperatures listed relate to retention of protective properties. Aesthetic properties may suffer at these temperatures.
It is a two pack polyamide cured high molecular weight epoxy gloss finish suitable for use in atmospheric environments as a primer in a multicoat system. It is recommended for factory concrete floors where resistance to heavy forklift traffic and chemical spillage is required. It can be applied up to 50 microns in a single coat by airless spray, two coats may be required to achieve the recommended DFT by brush or roller. On porous concrete a thinned (up to 15% by volume) first coat maybe required prior to application of a full coat.
It can be used as a primer or finish coat in a complete system in atmospheric environments. This product is only available in 5 and 20 litre packs and in a clear colour.
Containers of Clear Sealer must be kept in a dry, cool, well ventilated space and away from sources of heat and ignition, the tins must also be kept tightly closed. This product has a minimum shelf life of 48 months.
You may need
You may also like…
-
Jotafloor Rapid Dry Economic Fast Drying Floor Paint
£53.00 Select options This product has multiple variants. The options may be chosen on the product page -
Jotamastic 90WG Heavy Duty Epoxy Floor Paint RAL
£75.00 Select options This product has multiple variants. The options may be chosen on the product page -
Bradite HD Heavy Duty 2 Pack Epoxy Floor & Wall Paint RAL Colours
£99.80 Select options This product has multiple variants. The options may be chosen on the product page