Teamac Suregrip Anti-Slip Deck Paint
High Solids Aggregated Air Drying Deck Paint with a Rough Antislip Finish. Ideal for a range of Substrates.
The colours depicted on the site are for guidance only. The displayed colour will depend on your monitor and browser. All products are manufactured on computer controlled tinting machines matched to the official colour standards. Once manufactured orders cannot be cancelled or refunded.
Teamac Suregrip Anti-Slip Deck Paint
Teamac Suregrip Anti-Slip Deck Paint provides a Rough Anti-Slip Finish on Yachts, Power Boats and Narrowboats. It is an air drying ready mixed aggregated deck coating providing superior grip in marine wet environments. It is a safety coating for use interior and exterior use to prevent slips and falls. It is used for foot or light truck traffic and can be used on wood, metal, concrete, GRP and other suitably prepared surfaces. It is available in 8 ready mixed colours in 5lt packs for free delivery throughout the UK to your home, workshop or boatyard.
Technical Credentials.
Aggregated Air Drying Anti Slip Deck Paint.
High Volume Solids 62%.
Dry Film Thickness 60-100 microns.
Theoretical Coverage 10m2/lt (60 microns).
Surface Dry 6 hrs @ 20c.
Overcoat 16hrs @ 20c.
Apply by Roller or Brush.
VOCs 343 g/lt.
Surface Preparation.
Coated Surfaces: Ensure the existing coat is intact, compatible, dry and free from oil grease and other contaminants.
Concrete: Mechanically abrade to remove loosely adhering material and laitance. Alternatively low pressure water washing to a rough , clean and laitance free surface. Moisture content at painting max 5%.
Wood: Prime with suitable wood primer or Bradite One Can.
Download the technical data sheet for more information.
Teamac Suregrip Anti-Slip Deck Paint is an air drying ready mixed, aggregated deck coating which provides a rough anti-slip finish when dry.
It is a safety coating for use inside and outside where a sure foothold is required. It is used for foot or light truck traffic and can be used on wood, metal, concrete, GRP and other suitably prepared surfaces.
Teamac Suregrip can only be applied by a brush or short/medium roller with a minimum overcoating time of 16 hours. The wet film thickness is 100-150 microns to achieve a dry film thickness of 60-100 microns, this will make it touch dry in 6 hours at a temperature of 20°C.
This product should be applied within confined spaces with adequate ventilation to achieve faster drying times.
It is available in available in 8 ready mixed colours in 5lt packs for free delivery throughout the UK to your home, workshop or boatyard.
