Jotun Resist 86 2 Pack Inorganic Zinc Silicate Primer


A fast drying two pack inorganic zinc silicate primer for steel

with very high zinc content conforming to the requirements of SSPC paint 20, level 1. It provides excellent corrosion resistance on steel and is heat resistant up to 540c. It is suitable as a primer in aggressive C5-M marine environments and is prequalified for use in Norsok M-501, Rev 5, system 1.

SKU: N/A Categories: , ,


Jotun Resist 86 Primer is a high solids, fast drying two pack zinc rich ethyl silicate primer with a high content of zinc that complies with the compositional requirements for SSPC Paint 20 level 1 and ISO 12944. Barrier is supplied with ASTM D520 Type II zinc dust.

Resist 86 Inorganic Zinc Silicate Primer is designed for new construction where fast dry to handle and overcoating times are required. It is suitable for use on steel to be exposed to highly corrosive C5M environments. It can be applied by Airless spray on abrasive blast cleaned steel. Resist 86 Inorganic Zinc Silicate Primer is prequalified in accordance with Norsok M501 System 1. Resist 86 Primer is resistant to continuous temperatures of up to 400°C

Resist 86 Inorganic Zinc Silicate  is a two pack primer that  provides excellent corrosion protection as part of a complete coating system suitable for use in atmospheric environments.It is recommended for offshore environments, structural steel, power plants, building products, construction and steel bridges. It can be applied up to 90 microns in a single coat by airless spray.

Surface Preparation

Carbon Steel:  Minimum Sa 2.5 (ISO 8501-1)

Technical Data

Resist 86 Comp A
Download Datasheet
Resist 86 Comp B
Download Datasheet

Volume Solids (ISO 3223):  67%
VOC Content:  465 g/lt
Flash point (ISO 3679):  14c
Dry Film thickness:  50-90 microns
Wet Film thickness:  75-135 microns
Theoretical coverage:  13.4-7.4 sq m/lt
Mix Ratio:  8:2.6
Pot Life 23c:  8 hrs
Touch Dry 23c:  15 mins
Overcoat 23c:  4 hrs
Nozzle tip:  18-23 thou
Pressure at nozzle:  1400psi
Thinner:  No. 4
H&S:  Observe the precautionary information on the container. Refer to MSDS for full health and safety information and storage regulations.


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…