Jotun Penguard Express MIO High Build Epoxy Primer
High Build High Solids two pack Epoxy MIO Primer Intermediate for Steel Fabrications. Fast Drying and Overcoating for High Productivity. Suitable for Steel, Galvanised Steel and Aluminium.
Jotun Penguard Express MIO High Build Epoxy Primer
Jotun Penguard Express MIO is a two pack high build fast drying micaceous iron oxide epoxy primer with high solids. It is specially designed for new construction where short dry to handle and overcoating times are required. It can be used as a primer and intermediate coat in atmospheric environments on steel, concrete, aluminium and galvanised steel. It is suitable for use as a primer or intermediate coat in aggresive C5M Coastal and C4 Industrial environments, It is recommended for offshore locations, refineries, petrochemical and industrial facilities. The lamina nature of the MIO pigments improves water resistance and extends the maximum overcoating times. It is available in a grey matt finish for free delivery throughout the UK.
Technical Credentials.
High Build Epoxy Micaceous Iron Oxide Primer.
High Volume Solids 74%.
Matt MIO Finish.
Dry Film Thickness 75-250 microns.
Theoretical Coverage 7.4 m2/lt (100 mics).)
Surface Dry 1 hrs @ 23c.
Overcoat 2 hrs @ 23c.
Pot Life 2 hrs @ 23c.
Apply by Airless Spray, Roller or Brush.
Thinner No. 17.
VOCs 264 g/lt.
Surface Preparation.
Carbon Steel: Minimum St 2 , Recommended Abrasive blast clean to Sa 2.5. (ISO 8501-1)
Galvanised Steel: As a minimum the surface shall be clean dry and have a rough dull profile. It is recommended to lightly sweep blast using non metallic abrasives leaving a clean, rough dull surface.
Download the technical data sheet for more information.
Jotun Penguard Express MIO is a fast drying high build two pack amine cured epoxy primer designed for new construction where fast dry to handle and overcoating times are required. Penguard Express MIO is suitable for use on steel to be exposed to highly corrosive C5M environments. It can be applied by Airless spray, Conventional spray or brush and can be applied at sub zero temperatures. It is prequalified in accordance with Norsok M501 System 1. Jotun Penguard Express MIO is resistant to continuous temperatures of up to 120°C
Penguard Express MIO is a two pack epoxy matt suitable for use in atmospheric environments as a primer or intermediate coat in a multicoat system. It can be applied direct to carbon steel, galvanised steel, aluminium and concrete surfaces. It is recommended for offshore environments, structural steel, power plants, building products, construction and steel bridges. It can be applied up to 250 microns in a single coat by airless spray, two coats may be required to achieve the recommended DFT by brush or roller.
You may need
You may also like…
-
Jotun Jotamastic 90 Marine Surface Tolerant Epoxy Primer
£77.50 Select options -
Jotun Hardtop XP Marine 2 Pack Polyurethane Gloss Finish
£67.00 Select options -
Jotun Penguard Express High Build Epoxy Primer Intermediate
£65.00 Select options -
Jotun Barrier 2 Pack Zinc Rich Epoxy Primer
£95.00 Select options