Jotafloor Rapid Dry Fast Drying Floor Paint Stock Colours
The colours depicted on the site are for guidance only. The displayed colour will depend on your monitor and browser. All products are manufactured on computer controlled tinting machines matched to the official colour standards. Once manufactured orders cannot be cancelled or refunded.
Jotafloor Rapid Dry Fast Drying Floor Paint Stock Colours
Jotun Jotafloor Rapid Dry an Economical Industrial Fast Air-Drying Floor Paint for Concrete, Masonry, Wood and Cement. Available in 5lt packs with Free Delivery
Jotun Jotafloor Rapid Dry is hard wearing with good chemical and water resistance, ideal for workspaces subject to pedestrian and light traffic. It is a single pack fast air-drying alkyd paint, touch dry in 30 mins and can be overcoated in 2 hours. It is walk on dry in one hour.
Jotun Jotafloor Rapid Dry is economical floor coating designed to seal and colour concrete floors in garages, workshops, factories, warehouses, and more.
This Fast-air-drying solvent-based floor paint is easy to apply on concrete, steel and wooden surfaces by brush or roller, it is touch dry in 30 minutes and can be overcoated in two hours It is walk on dry in one hour. Two coats should be applied each 50 microns dry film thickness, coverage is approximately 10 square metres per litre per coat.
It is available for free next day delivery in either a stock RAL 3009 or 7011 colour, Jotafloor can also be tinted to an extensive range of RAL Classic colours, to see the full range of colours click here. This paint is only available in a gloss finish in 5lt packs providing a non-slip aggregate may be added in areas classified as a potential slip hazard such as stairwells and walkways.
Surfaces to be painted should be sound, clean and dry. On bare concrete prime with one coat of Jotafloor Rapid dry thinned 10% with Jotun No. 7 thinners. New concrete should be allowed to dry and cure (approx. 3 months) before applying the primer coat. Exceptionally smooth surfaces (e.g. concrete levelling compound or power floated floors) should be abraded first using Acid Etch or an abrading machine to help produce a ‘key’.
On existing painted floors ensure the surface is free from oil, grease and other contaminants. Remove any loosely adhering paint back to a sound surface. Patch prime any exposed areas of concrete before applying two full coats. Take care to follow the technical data for drying and overcoating times.
For more information on this product, check the Technical Data Sheet.
Jotun Jotafloor Rapid Dry has good chemical and excellent water resistance for many surfaces including concrete, masonry, wood and cement flooring that is subject to light traffic.
This Tough Fast Air-Drying Industrial Floor Paint is economical, hard wearing and easy to apply, ideal for garages, factories, barns, warehouses, workshops and more. It is available in a Stock RAL 3009 and 7011 in a gloss finish, extensive range of RAL Classic colours are also available here.
A Tough Fast Air-Drying Industrial Floor Paint it is ideal for repainting concrete floors and walkways in garages, factories, barns, warehouses, workshops and more. It produces a tough hard wearing and water-resistant gloss finish.
Jotun Jotafloor Rapid Dry is suitable for application by brush or roller. Two coats should be applied allowing two hours between coats. It is touch dry in 30 minutes and walk on dry in one hour.
Surfaces to be painted should be sound, clean and dry. On bare concrete prime with one coat of Jotafloor Rapid Dry thinned 10% with Jotun No. 7 thinner. New concrete should be allowed to dry and cure (approx. 3 months) before applying the primer coat. Exceptionally smooth surfaces (e.g. concrete levelling compound or power floated floors) should be abraded first using Acid Etch or an abrading machine. This will help produce a ‘key’.
While the floor will take light foot traffic after overnight drying, full properties will be achieved after 5 to 7 days at 20c and should not be subjected to heavy traffic. Take care to follow the technical data for drying and overcoating times.
