
Graphentstone Paints are designed to help old houses which need to breathe. If you own a Cottage, Victorian Terrace or Georgian Townhouse, chances are you have lime plaster internally and lime render externally. These substrates are vapour open; meaning moisture needs a safe path out through the wall. Seal that route with a non-breathable coating and you trap damp. That is when you see blistering paint, salt staining, mould, and crumbling plaster.
This guide explains what breathability means in practice, how to read ‘Sd’ values, how to source genuine breathable paint systems, and how to test what is already on your walls. It then compares leading interior and exterior options from Graphenstone, with clear advice on where each product works best.
Vapour open means water vapour can pass through the coating. Breathable paints allow this transfer so walls can dry out naturally after rain or to release internal humidity.
• Sd value is the diffusion-equivalent air layer thickness, measured in metres. The lower the Sd, the more vapour open the coating.
• Sd < 0.05 m is ultra-breathable (pure lime, mineral lime or silicate systems)
• Sd ~ 0.05 to 0.14 m is highly breathable
• Sd > 0.5 m begins to restrict drying on lime substrates
Mineral chemistry matters. Pure lime and lime-silicate paints chemically bond with mineral substrates and remain micro-porous. By contrast, many vinyl and acrylic emulsions create a film that can trap moisture in lime-based walls.
Lime Plasters and Renders manage moisture by absorbing and releasing it. In older buildings without modern damp proof courses, this buffering is essential. Breathable paints support that cycle, helping to:
• Reduce condensation and black mould risk
• Limit salt migration (effervescence) and blistering
• Preserve the strength of the lime plaster and render
If your walls are damp and non-breathable paint has been applied, the moisture is trapped, paint blisters will keep returning and tide marks reappear after repainting.
Start with simple tests and checks:
• The condensation test: tape a square of clear plastic to the wall and seal edges. If moisture builds behind it within a few hours in a humid room, the wall is releasing vapour. If paint is blocking that route, damp may build around weak points in the surface.
• The acetone rub: on a hidden area, lightly rub with acetone on a cloth. Some acrylic films soften, mineral paints typically do not. Always proceed carefully.
• Check the product technical datasheet, credible breathable systems publish Sd values and test standards. If the Sd value is not shown its most likely not a breathable paint. Contact the supplier.
If you find a non-breathable layer over lime, consider sweep blasting or mechanically abrading to carefully remove the coating, then prime and finish with Graphenstone Paints. For tailored guidance on substrates and schemes contact the AVACE Customer service team.
Choosing the right system depends on room use, substrate, and maintenance expectations. Here is how the leading Graphenstone options compare.
Ambient Pro+ Pure Lime Paint
• Use: interiors and exteriors on sound mineral substrates, including lime plaster and lime render.
• Why: highest breathability, addition Air Purification properties absorbing CO2, formaldehydes, Nitrous and Suphur Dioxides. It is non-combustible (A1) and microplastic free.
• Look and colour: refined ultra-matt 2% mineral finish; limited to white shades due to lime chemistry.
• Best for: exterior white cottage walls, bedrooms and living spaces, where breathability, indoor air quality, and sustainability is critical.
GrafClean Premium
• Use: interior walls and ceilings, including kitchens, hallways and bathrooms
• Why: lime-mineral binder, highly breathable, Eurofins Indoor Air Quality Gold and Child- safe.
• Look and Colour: Available in a wide range of English Heritage colours in a 4% matt finish, Class 1 washable for easy cleaning and fire rated B-s1, d0.
• Best for: busy interiors needing regular cleaning and Air Quality in children’s rooms.
GCS Lime Silicate Exterior
• Use: exterior and interior lime-rendered façades and mineral substrates.
• Why: lime silicate English Heritage paint , highly breathable, fire-rated non combustible A2-s1, d0, excellent durability and adhesion on lime render, high coverage. Typically lower applied cost than leading silicate rivals.
• Look and Colour: Available in a wide range of English Heritage colours in a 2% matt finish, Class 1 washable for easy cleaning
• Best for: exterior walls on heritage restoration projects needing a wide English Heritage colour choice, a tough, breathable mineral finish with long maintenance intervals.
Naturcolor Contract Matt
• Use: interior walls and ceilings where sustainability and low applied costs on large contracts is a priority. Breathable finish suitable for lime and modern plasters.
• Why: High opacity and coverage rates with low applied costs. A natural contract paint for house builders and social housing where vapor open coatings are required with low odour and low VOCs.
• Look and Colour: Available in a select range of popular contract colours in a 4% matt finish, Class 2 wipeable finish for easy cleaning
• Best for: whole-house refreshes, rentals, or projects that need breathable paint at lower cost, and as a mist coat on new lime plaster
Primer recommendation: on variable or highly porous mineral substrates, apply Ambient Primer L42 before any Graphenstone topcoat to equalise absorption and support adhesion. Sd 0.06m breathable primer. Mix 1:1 with water before applying, high coverage rates 20m2/lt.
All the Graphenstone systems above are designed for lime renders, lime and modern plasters and mineral substrates. On fresh lime plaster or render, allow adequate carbonation and drying before applying. Avoid vinyl and high-film-build acrylic primers.
Can you get breathable exterior paint?
Yes. Mineral lime-silicate systems like GCS Exterior Lime Silicate, deliver high breathability plus weather durability, colour stability, and a crisp low-sheen finish suited to historic façades. For interior and exterior projects prioritising air quality and low carbon metrics, Ambient Pro+ meets the highest environmental standards, although colour choice is limited.
Are acrylic trade paints suitable on lime?
Most conventional vinyl and many acrylic emulsions are not ideal on lime plaster because they restrict vapour movement. If you are considering modern acrylics and clay paints check the product’s Sd value and binder type. In general, choose a proven mineral system with published breathability for lime substrates.
What is the most breathable paint?
• Pure mineral coatings with very low Sd values, notably pure lime paints such as Graphenstone Ambient Pro+, and lime-silicate masonry paints like GCS Lime Silicate Exterior.
What are the best breathable paints for old houses?
• Ambient Pro+ for ultra-breathable walls and improved air quality, GrafClean Premium for washable, child-safe interiors, GCS Lime Silicate for lime-rendered exteriors, and Naturcolor for budget-friendly, low-Sd interiors and mist coats.
Can you get breathable exterior paint?
• Yes. Use GCS Lime Silicate Exterior on lime-rendered façades. Ambient Pro+ can also be used on suitable mineral exteriors, although only available in shades of white.
How can you tell if paint is breathable?
• Check published Sd data, inspect the surface, try the taped plastic test, and verify chemistry. Mineral systems state breathability clearly.
What is the best breathable paint for lime plaster?
• For maximum vapour openness, Ambient Pro+. For rooms needing robust cleaning, GrafClean Premium balances breathability with Class 1 washability.
Is Dulux breathable paint suitable for lime plaster?
• It depends on the exact product and its Sd value. Many mainstream acrylics are not ideal on lime. Choose a mineral, vapour-open system for confidence.
What breathable paints are available in the UK?
• Graphenstone Ambient Pro+, GrafClean Premium, GCS Lime Silicate Exterior, and Naturcolor are widely available with technical backing and colour support from AVACE.
What is the best breathable masonry paint in the UK?
• For lime-rendered façades, GCS Lime Silicate Exterior offers high breathability, strong durability, and attractive low-sheen English Heritage colours at competitive applied cost.
Breathable paints protect the health of lime-based walls by letting moisture out, not locking it in. Choose low Sd mineral systems, match washability to room use, and prime wisely on patchy substrates. Explore our breathable paints and tools to plan a low-VOC, low GWP scheme, or speak with our customer service team to specify the right system for your home.
For project discounts, complete our ‘Request a Quotation’ form, or simply email at sales@avace.co.uk, or visit our showroom in Brierley Hill. DY5 1UT
Learn more about English Heritage here.


