Selemix UHS Acrylic Topcoat 7-120


A fast drying high build high gloss two pack polyurethane topcoat

with excellent colour retention, corrosion and abrasion resistance. Selemix UHS Acrylic topcoat is a compliant coating available in a wide range of RAL and British standard colours in an automotive quality finish. It is recommended as a topcoat in C5-M environments.

RAL Classic 1000
RAL Classic 2000
RAL Classic 3000
RAL Classic 4000
RAL Classic 5000
RAL Classic 6000
RAL Classic 7000
RAL Classic 8000
RAL Classic 9000


Selemix UHS Acrylic Topcoat is a very high gloss chemical resistant two pack acrylic finish suitable as a topcoat in aggressive C5-M low environments with high solids and low VOC. Selemix UHS Acrylic Paint is available in a wide range of colours with excellent colour and high gloss retention. Selemix UHS Acrylic Paint can be applied by Conventional spray it is an ideal high performance topcoat over Selemix Epoxy and Polyurethane primers when a durable high gloss finish with excellent chemical and weather resistance is required.

Selemix UHS Acrylic Topcoat is a high solids low VOC fast drying two pack high gloss acrylic finish recommended for use in atmospheric environments for application over suitably primed substrates.  It is recommended for outstanding corrosion protection and weathering in aggressive C5-M low rated environments for industrial & construction equipment, agricultural equipment, earthmoving equipment, building products and structural steel. Two coats are recommended for best results, it may be applied up to 50 microns dry film thickness allow 20 minutes flash off between coats.


Surface Preparation

Painted surfaces: Surface to be clean, dry and undamaged compatible coating, free from oil grease and other contaminants. Recommended over Selemix Epoxy primer 7-413 or Polyurethane primer 2-705.

Technical Data

Download Datasheet Download Datasheet

Volume Solids (ISO 3223): 58% Ready for use.
VOC Content: 320 g/lt
Flash point (ISO 3679): 25c
Dry Film thickness: 40 microns
Wet Film thickness: 70 microns
Theoretical coverage: 8 sq m/lt
Mix Ratio: 2:1 (Hardener 9-120, Fast Hardener 9-130)
Pot Life 20c: 2 hrs
Touch Dry 20c: 10mins
Nozzle tip: 1.3-1.6mm conventional
Pressure at nozzle: 50psi Conventional
Thinner: No. 1-430, slow thinner 1-470
Technical: See Selemix full TDS for further information on mixing and application

H&S: Observe the precautionary information on the container. Refer to MSDS for full health and safety details and storage regulations.


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…